SCANNER INDUSTRIALE DATALOGIC DS 2100

Caratteristiche

ELECTRICAL CHARACTERISTICS POWER SUPPLY 10 to 30 VDC (5 VDC optional) POWER CONSUMPTION 3 W (XXX0 models); 4 W (XXX4 models) MECHANICAL CHARACTERISTICS WEIGHT 300 g (10.3 oz) CASE MATERIAL Aluminium PERFORMANCE LIGHT SOURCE Visible laser diode (630 to 680 nm) SCANNING SPEED 500 to 800 scan/s (XXX0 models); 800 to 1000 scan/s (XXX4) MAX. RESOLUTION 0.20 mm (8 mils) (1XXX models); 0.15 mm (6 mils) (2XX0); 0.12 mm (5 mils) (2XX4) MAX. READING DISTANCE300 mm (11.8 in) (1XX0 models); 310 mm (12.2 in) (1XX4 models) 90 mm (3.5 in) (2XX0); 100 mm (3.94 in) (2XX4) MAX. DEPTH OF FIELD 260 mm (10.0 in) (1XX0); 60 mm (2.4 in) (2XX0); 250 mm (10 in) (1XX4); 55 mm (2.2 in) (2XX4) COMMUNICATION Main port: selectable RS232 or RS485 INTERFACES Auxiliary port: RS232 CONNECTOR 25 pin D-Sub female connector APERTURE ANGLE 60° READABLE CODES Most popular types including 2/5 family, Code 39, Code 93, Code 128, EAN/UPC, Codabar, EAN 128, Pharmacode MULTILABEL READING Up to 6 different codes in the same presence sensor phase BAUD RATE Up to 115.2 Kbaud on both serial ports INPUT SIGNAL ‘External trigger’ (Optocoupled NPN/PNP transistor) OUTPUT SIGNALS 2 SW programmable optocoupled NPN transistors PROGRAMMING METHOD Via serial port (WINHOST™) OPERATING MODES ‘On line’, ‘Serial on line’, ‘Automatic’, ‘Test’, ‘Verifier’ LED INDICATORS ‘Power/TX’, ‘Laser On’, ‘Good Read’, ‘External Trigger’ LASER CLASSIFICATION IEC 825 Class 2 LASER CONTROL Security system to turn laser off in case of motor slow down or failure MOTOR CONTROL Motor on/off SW command . - ENVIRONMENT OPERATING TEMP. 0 to 40 °C (32 to 104 °F) STORAGE TEMP. -20 to 70 °C (-4 to 158 °F) HUMIDITY 90% non condensing VIBRATION IEC 68-2-6 test FC RESISTANCE 1.5 mm; 10 to 55 Hz; 2 hours on each axis SHOCK IEC 68-2-27 test EA RESISTANCE 30 G; 11 ms; 3 shocks on each axis PROTECTION CLASS IP65